Activity Stream

Hi The actual make up of the salt also has an affect on the salinity i.e sodium and chlorides, different blends will have different element...

Woops I forgot a step in that last post, I forgot to put that in terms of kg of salt. It's not 1.863 g of water! It's 48.77g. Still a big difference!

Hi, So if I understand what you're saying, the discrepancy between your salt dosage guide and other manufacturers is simply due to moisture...

Hi Actually it's round the other way. Our seawater refract measures seawater at true refractive index when calibrated correctly so the salinity...

Dear Gabriel We no longer have Marvin in the USA for Deltec , C2 distribution will be our main D-D USA distributor but as far as im aware wont be...

Hello, Just wanted to make sure i should email Canada or USA distributor.... Gabriel

If the stator is undamaged and the bottom bearing hasn't become trapped on the shaft and spun at any point then a new impeller should work for you....

No cracks just a lot of scratches and scoring on the impeller.. The plastic needle wheel has no damage. It remains snug when placed into the...

having a hard time attaching photos

Also the top bearings isn't in position, it should be up inside the top plate bearing seat without the red o-ring showing. Is the needle wheel still...

Hi There seems to be some scoring inside the stator (pump block) too, can you identify any cracks inside the impeller aperture in the stator or...

................

Pic 2..........

Pic 1 .........

Dear Gabriel Have you checked that the inside of the pump stator is smooth and that the bottom bearing is still tight within the pump. Phil will...

Thank you, I posted in my other thread.

Thank you for the quick response. I'm in Los Angeles. My impeller no longer rotates/spins in the maget. All I get is this clunking sound and then...

Dear Bebo The Deltec sales team within the U.S has changed. Can you please contact Phil in Canada at the contact details below: ...

Dear Gabriel Can you let me know where you are located as I could give you our spares contact within the U.K but I don't know where you are...

All phone numbers are disconnected. Who do we call for spare parts? I sent an email an posted a thread. Need a needle wheel ASAP.

Many thanks for the help offered.

Hi John Your last post was moderated , I've just approved it now and you can find it under this one in latest think tank threads. Best regards

Dear John I would run a medium coarse foam sponge block around the front of the pump intake, this will diffuse the amount of point suction over...

Hi Jimmy Many apologies I thought I replied to a similar mail. I suggest a 32ml/min peristaltic pump with the effluent adjusted via a timer like...

Just to add , how to video links can also be found on our website: http://www.theaquariumsolution.com/ai-mkii-controller-video-guides Regards